POTASSIUM CYANIDE

POTASSIUM CYANIDE Basic information
Uses Description
Product Name:POTASSIUM CYANIDE
Synonyms:POTASSIUM CYANIDE 1 KG;POTASSIUM CYANIDE FOR ANALYSIS EMSURE;POTASSIUM CYANIDE 50 KG;Solid Potassium Cyanide;TRIS BUFFER 0.1M PH 7.4;POTASSIUM CYANIDE FOR ANALYSIS EMSURE ACS,ISO,REAG. PH EUR;Potassium Cyanide, Reag. Ph. Eur.;Potassium cyanide, 96+%
CAS:151-50-8
MF:CKN
MW:65.12
EINECS:205-792-3
Product Categories:metal cyanide;Inorganics;Masking AgentsAnalytical Reagents for General Use;ACS Grade;Essential Chemicals;Routine Reagents;Complexometric Titration (IDRANAL);O-P, Puriss p.a. ACS;Puriss p.a. ACS;Titration;O-P, Puriss p.a.;Puriss p.a.;Masking Agents
Mol File:151-50-8.mol
POTASSIUM CYANIDE Structure
POTASSIUM CYANIDE Chemical Properties
Melting point 634 °C (lit.)
Boiling point 1625 °C
density 1.00 g/mL at 20 °C
vapor pressure 1.8hPa at 634.5℃
Fp 1625°C
storage temp. Poison room
solubility H2O: 1 M at 20 °C, clear, colorless
pka9.36[at 20 ℃]
form Solid
Specific Gravity1.52
color White
PH11-12 (20g/l, H2O, 20°C)
Water Solubility Highly soluble in water. Soluble in methanol, glycerol, and formamide. Slightly soluble in ethanol.
Sensitive Hygroscopic
Merck 14,7626
BRN 4652394
Exposure limitsTLV-TWA (measured as CN) skin 5 mg CN/m3 (ACGIH and OSHA); 5 mg CN/m3/ 10 min ceiling (NIOSH).
Stability:Stable. Incompatible with a variety of materials, including acids, iodine, peroxides, permanganates, alkaloids, chloral hydrate, metallic salts. Light and moisture sensitive. Contact with acid generates extremely toxic HCN gas.
LogP-0.252 at 20℃
CAS DataBase Reference151-50-8(CAS DataBase Reference)
EPA Substance Registry SystemPotassium cyanide (151-50-8)
Safety Information
Hazard Codes T+,N
Risk Statements 26/27/28-32-50/53
Safety Statements 7-28-29-45-60-61
RIDADR UN 1680 6.1/PG 1
WGK Germany 3
RTECS TS8750000
3-8-10-23
TSCA Yes
HS Code 2837 19 00
HazardClass 6.1
PackingGroup I
Hazardous Substances Data151-50-8(Hazardous Substances Data)
ToxicityLD50 orally in rats: 10 mg/kg (Hayes)
IDLA25 mg/m3(as CN)
MSDS Information
ProviderLanguage
ACROS English
SigmaAldrich English
ALFA English
POTASSIUM CYANIDE Usage And Synthesis
UsesPotassium cyanide (KCN) is a white crystalline substance with a slight odor of bitter almonds. It is produced when hydrogen cyanide is absorbed in potassium hydroxide. It is used to extract gold and silver from their ores, in electroplating computer boards, and as an insecticide. Potassium cyanide is very toxic to the skin or when ingested or inhaled, and it is used as a source of cyanide (CN) gas in gas chambers.
Description

Potassium cyanide, in addition to processes already described, can be prepared by the reaction of potassium carbonate with calcium hexacyanoferrate(II) or by thermal decomposition of K4Fe(CN)6 above 435°C. Rubidium and cesium cyanides can be prepared by the reaction of HCN with the metal hydroxides in alcohol or ether or with the corresponding metals in anhydrous ether or benzene. Hydrogen reduction of metal cyanates produces water and the corresponding cyanide, as does reduction with carbon monoxide.

DescriptionPotassium cyanide, KCN, is a cyanide salt that is found as a white, amorphous, deliquescent lump or crystalline mass with a faint odor of bitter almonds. It is soluble in water and has a specific gravity of 1.52. It is a poison that is absorbed through the skin. Target organs are the same as for sodium cyanide. Reaction with acids releases flammable and toxic hydrogen cyanide gas. The four-digit UN identification number is 1680. The NFPA 704 designation is health 3, flammability 0, and reactivity 0. The primary uses are in gold and silver ore extraction, insecticides, fumigants, and electroplating.
Chemical PropertiesKCN is a white solid or colourless water solution with a faint bitter almond odour. As a solution, it is slightly soluble in ethanol. It is a poison that reacts with acid or acid fumes to emit deadly HCN. When heated to decomposition, it emits very toxic fumes. As a solid, KCN is incompatible with nitrogen trichloride, perchloryl fluoride, sodium nitrite, acids, alkaloids, chloral hydrate, and iodine. A synonym for KCN is potassium salt of hydrocyanic acid.
Chemical PropertiesPotassium cyanide are white lumps, granular powder, or colorless solution. It may be shipped as capsules, tablets, or pellets. Toxic hydrogen cyanide gas released by potassium cyanide has a distinctive, weak bitter almond odor, but many people cannot detect it; the odor does not provide adequate warning of hazardous concentrations.
UsesPotassium cyanide is a white granular salt made by the absorption of hydrogen cyanide in potassium hydroxide. It is soluble in both water and alcohol and a lethal poison. If mixed with acids it produces highly toxic hydrogen cyanide gas. This was the preferred fixing chemical for collodion positives because it contained no sulfides to darken the highlight silver. As a fixing agent cyanide was particularly effective. After dissolving the unexposed silver halides cyanide would also remove nonimage fog producing very clean shadow areas. Prolonged fixing would eventually remove image silver. Tincture of iodine was added to dilute solutions of potassium cyanide and used to remove unwanted non-image silver in photographic materials and to remove silver stains.
UsesExtracting gold and silver from ores; electroplating baths; silver plating; case hardening steel by liquid nitriding; reagent in analytical chemistry.
UsesPotassium cyanide is used for electrolytic refining of platinum; fine silver plating; as an electrolyte for the separation of gold, silver, and copper from platinum; and for metal coloring.
Production MethodsPotassium cyanide was made by the Beilby process before the introduction of the neutralization or wet process. When made by the neutralization or wet process, it contains 99% KCN. Initially, potassium cyanide was used as a flux and later for electroplating, which was the single largest use in the 1990s. The demand for potassium cyanide was met by the ferrocyanide process until the latter part of the nineteenth century when the extraordinary demands of the gold mining industry for alkali cyanide resulted in the development of direct synthesis processes. When cheaper sodium cyanide became available, potassium cyanide was displaced in many uses.
DefinitionChEBI: Potassium cyanide is a cyanide salt containing equal numbers of potassium cations and cyanide anions. It has a role as an EC 1.9.3.1 (cytochrome c oxidase) inhibitor, an EC 1.15.1.1 (superoxide dismutase) inhibitor and a neurotoxin. It is a cyanide salt, a one-carbon compound and a potassium salt.
General DescriptionWhite amorphous lumps or a crystalline mass with a faint odor of bitter almonds. Density 1.52 g / cm3 Toxic by skin absorption through open wounds, by ingestion. Heating to decomposition produces toxic fumes. Used for gold and silver extraction, in chemical analysis, to make other chemicals, and as an insecticide.
Air & Water ReactionsDeliquescent. Soluble in water. Dissolution releases some poisonous hydrogen cyanide gas. The amount is not hazardous except in an enclosed space. If the water is acidic, dangerous amounts of hydrogen cyanide form at once.
Reactivity ProfilePOTASSIUM CYANIDE is a basic salt and a reducing agent. Reacts with acids of all kinds to generate poisonous hydrogen cyanide gas. Can react violently with oxidizing agents: fusion with metal chlorates, perchlorates, nitrates, or nitrites can cause explosions [Bretherick 1979. p. 101]. A mixture with perchloryl fluoride may explode above 100°C. A mixture with nitrite salts may cause an explosion [Pieters 1957. p. 30]. Incompatible with iodine. Initiates the explosive decomposition of nitrogen trichloride.
HazardA poison as absorbed by skin.
Health HazardPOTASSIUM CYANIDE is classified as super toxic. Probable oral lethal dose in humans is less than 5 mg/kg or less than a taste (7 drops) for a 150 lb. person. It is an eye and skin irritant. Poisonous in very small quantities; a taste is lethal.
Health HazardPotassium cyanide is a dangerous poison; toxicity comparable to that of sodium cyanide. Ingestion of 100–150 mg of this compound could be fatal to humans. Similar toxicity is observed when KCN is absorbed through skin or eyes. Intake of the quantity above can cause collapse and cessation of breathing.
At lower concentrations the acute toxic symptoms are nausea, vomiting, headache, confusion, and muscle weakness. KCN administered in test animals by the intramuscular, intravenous, intraperitoneal, ocular, and oral routes exhibited LD50 values within the range of 3–9 mg/kg; the acute toxic effects were ataxia, respiratory stimulation, paralysis, and seizure.
Smith and Heath (1979) observed the effect of temperature on KCN toxicity of freshwater fish. When the temperature of exposure was lowered from 15 (59) to 5°C (41°F) the toxicity of KCN to goldfish decreased by a factor of 5.
LD50 value, intraperitoneal (rats): 4 mg/kg
LD50 value, oral (rats): 10 mg/kg
LD50 value, oral (humans): 2.86 mg/kg
Potassium cyanide caused reproductive damage in test animals, producing harmful effects on fertility and embryo.
Health HazardPotassium cyanide is a white solid or colorless water solution with a faint bitter almond odor. As a solution, it is slightly soluble in ethanol. It is a poison that reacts with acid or acid fumes to emit deadly hydrogen cyanide. When heated to decomposition, it emits very toxic fumes. As a solid, potassium cyanide is incompatible with nitrogen trichloride, perchloryl fl uoride, sodium nitrite, acids, alkaloids, chloral hydrate, and iodine. A synonym for potassium cyanide is potassium salt of hydrocyanic acid
Health HazardIngestion of KCN or exposure to the salts or their aqueous solutions by eye or skin contact can be fatal; exposure to as little as 50 to 150 mg can cause immediate collapse and death. Poisoning can occur by inhalation of mists of cyanide solutions and by inhalation of HCN produced by the reaction of metal cyanides with acids and with water. Symptoms of nonlethal exposure to cyanide include weakness, headache, dizziness, rapid breathing, nausea, and vomiting. These compounds are not regarded as having good warning properties.
Effects of chronic exposure to sodium cyanide or potassium cyanide are nonspecific and rare.
Fire HazardPotassium cyanide is noncombustible solid. Reaction with acids liberates flammable HCN.
Fire HazardContact with acid releases highly flammable hydrogen cyanide gas. Moisture may cause POTASSIUM CYANIDE to volatilize as hydrogen cyanide. When heated to decomposition, POTASSIUM CYANIDE emits very toxic fumes of cyanide and nitrogen oxides. Reacts with acids to produce hydrogen cyanide gas. Reacts with strong oxidizers such as nitrates and chlorates, nitrogen trichloride; perchloryl fluoride; sodium nitrate; acids; alkaloids; chloral hydrate; iodine. Avoid contact with acids.
Flammability and ExplosibilityNonflammable
Industrial usesA white amorphous or crystalline solid of the composition KCN, potassium cyanide is employed for carbonizing steel for case hardening and for electroplating. For cyaniding steel the latter is immersed in a bath of molten cyanide and then quenched in water, or the cyanide is rubbed on the red-hot steel.
Commercial potassium cyanide is likely to contain a proportion of sodium cyanide. Potassium ferrocyanide, or yellow prussiate of potash, can also be used for case-hardening steel. It has the compositionK4Fe(CN)6and comes in yellow crystals or powder. The nitrogen as well as the carbon enters the steel to form the hard case. Potassium ferricyanide, or red prussiate of potash, is a bright-red granular powder of the composition K3Fe(CN)6, used in photographic reducing solutions, in etching solutions, in blueprint paper, and in silvering mirrors. Redsol crystals is the name of this chemical for use as a reducer and mild oxidizing agent, or toner, for photography.
Safety ProfileA deadly human poison by ingestion. A experimental poison by ocular, subcutaneous, intravenous, intramuscular, and intraperitoneal routes. Experimental teratogenic and reproductive effects. Human systemic effects by ingestion: convulsions, pulse rate increase. Mutation data reported. Reacts with acids or acid fumes to liberate deadly HCN. When heated to decomposition it emits very toxic fumes of K2O , CN-, and NOx. See also CYANIDE.
Potential ExposureUsed in electroplating, steel hardening; extraction of precious metals form ores; as a fumigant; in insecticides; a reagent in analytical chemistry
ShippingUN1680 Potassium cyanide, Hazard Class: 6.1; Labels: 6.1-Poisonous materials.
Purification MethodsA saturated solution in H2O-ethanol (1:3) at 60o is filtered and cooled to room temperature. Absolute EtOH is added, with stirring, until crystallisation ceases. The solution is again allowed to cool to room temperature (during 2-3hours), then the crystals are filtered off, washed with absolute EtOH, and dried, first at 70-80o for 2-3hours, then at 105o for 2hours [Brown et al. J Phys Chem 66 2426 1962]. It has also been purified by melting in a vacuum and by zone refining. HIGHLY POISONOUS.
IncompatibilitiesA strong reducing agent; keep away from oxidizers. Potassium cyanide decomposes on contact with water, humidity, carbon dioxide, strong acids (such as hydrochloric, sulfuric, and nitric acids), and acid salts, producing highly toxic and highly flammable hydrogen cyanide gas. Potassium cyanide absorbs water from air (is hygroscopic or deliquescent); the aqueous solution is a strong base. Incompatible with organic anhydrides; isocyanates, alkylene oxides; epichlorohydrin, aldehydes, alcohols, glycols, phenols, cresols, caprolactum, strong oxidizers; nitrogen trichloride; sodium chlorate. Attacks aluminum, copper, zinc in the presence of moisture.
Waste DisposalConsult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. In accordance with 40CFR165, follow recommendations for the disposal of pesticides and pesticide containers. Must be disposed properly by following package label directions or by contacting your local or federal environmental control agency, or by contacting your regional EPA office. Add strong alkaline hypochlorite and react for 24 hours. Then flush to sewer with large volumes of water.
GOLD(I) POTASSIUM CYANIDE,GOLD POTASSIUM CYANIDE,gold(i) potassium cyanide, premion RUTHENIUM POTASSIUM CYANIDE POTASSIUM CYANIDE-13C POTASSIUM CYANIDE/PYRIDINE,M2, POTASSIUM CYANIDE/PYRIDINE Benzenesulfonic acid, 2-formyl-, sodium salt, reaction products with disodium selenite and potassium cyanide Tetrapotassium hexacyanoferrate trihydrate RHODIUM POTASSIUM CYANIDE POTASSIUM CYANIDE SOLUTION IN PYRIDINE PotassiuM Cyanide-13C,15N NICKEL POTASSIUM CYANIDE Potassium ferrocyanide trihyrate POTASSIUM CYANIDE-15N,POTASSIUM CYANIDE-15N, 98 ATOM % 15N Potassium thiocyanate PLATINUM POTASSIUM CYANIDE POTASSIUM CYANIDE, [14C] POTASSIUM CYANIDE PLATINUM POTASSIUM CYANIDE, K2PT(CN)4?3H2O IRIDIUM POTASSIUM CYANIDE,IRIDIUM(III) POTASSIUM CYANIDE, 99.99%

Email:[email protected] [email protected]
Copyright © 2024 Mywellwork.com All rights reserved.