2,3-Dimethyl-2-butene

2,3-Dimethyl-2-butene Basic information
Product Name:2,3-Dimethyl-2-butene
Synonyms:2,3-dimethyl-but-2-ene;2,3-Dimethylbutene-2;Tetramethylethene;2,3-DIMETHYL-2-BUTENE;2,3-DIMETHYL-2-BUTENE, 1.0M SOLUTION IN TETRAHYDROFURAN;2,3-DIMETHYL-2-BUTENE, STAB.;2,3-DIMETHYL-2-BUTENE, 99+%;2,3-DIMETHYL-2-BUTENE 1.0 M IN THF
CAS:563-79-1
MF:C6H12
MW:84.16
EINECS:209-263-8
Product Categories:Alkenes;Organic Building Blocks;Acyclic
Mol File:563-79-1.mol
2,3-Dimethyl-2-butene Structure
2,3-Dimethyl-2-butene Chemical Properties
Melting point -75 °C (lit.)
Boiling point 73 °C (lit.)
density 0.708 g/mL at 25 °C (lit.)
vapor pressure 215 mm Hg ( 37.7 °C)
refractive index n20/D 1.412(lit.)
Fp 2 °F
storage temp. 2-8°C
solubility 0.071g/l
form Liquid
Specific Gravity0.708
color Clear colorless to slightly yellow
explosive limit1.2%(V)
Water Solubility Soluble in water (0.071 g/L)
Sensitive Air Sensitive
BRN 1361357
Stability:Stable. Highly flammable - readily forms explosive mixtures with air. Note low flash point. Incompatible with strong acids, strong oxidizing agents, peroxy compounds.
CAS DataBase Reference563-79-1(CAS DataBase Reference)
NIST Chemistry Reference2-Butene, 2,3-dimethyl-(563-79-1)
EPA Substance Registry System2-Butene, 2,3-dimethyl- (563-79-1)
Safety Information
Hazard Codes F,Xn,C
Risk Statements 11-65-36/37/38-22-19-40-36/37
Safety Statements 16-33-62-9-36/37/39-26-36/37
RIDADR UN 3295 3/PG 2
WGK Germany 3
10-23
Autoignition Temperature754 °F
Hazard Note Extremely Flammable/Corrosive/Harmful
TSCA Yes
HazardClass 3
PackingGroup II
HS Code 29012980
MSDS Information
ProviderLanguage
2,3-Dimethyl-2-butene English
SigmaAldrich English
ACROS English
ALFA English
2,3-Dimethyl-2-butene Usage And Synthesis
Chemical Propertiescolourless liquid
Uses2,3-Dimethyl-2-butene was used in the preparation of thexyl NHC-borane (diMe-Imd-BH2thexyl).
General Description2,3-Dimethyl-2-butene undergoes hydrolysis to form hydroxyl radical.
Purification MethodsPurify it by GLC on a column of 20% squalene on chromosorb P at 50o [Flowers & Rabinovitch J Phys Chem 89 563 1985]. Also wash it with 1M NaOH solution followed by H2O. Dry it over Na2SO4, distil it over powdered KOH under nitrogen and pass it through activated alumina before use. [Woon et al. J Am Chem Soc 108 7990 1986, Wong et al. J Am Chem Soc 109 3428 1987, Beilstein 1 IV 853.]
1,1-Bis(trimethylsilyl)-3,3-dimethyl-1-butene [R,(-)]-1,4-Bis(4-acetyloxy-3-methoxyphenyl)-2,3-dimethyl-1-butene Jasmone Polybutene 1,4,5,8,9,10-Hexahydroanthracene Dacthal 9-DICYANOMETHYLENE-2,4,7-TRINITROFLUORENE 1,1-BIS(TRIMETHYLSILYLOXY)-3,3-DIMETHYL-1-BUTENE,1,1-Bis(trimethylxilyloxy)-3,3-dimethyl-1-butene. 1,2,3,4,5,6-HEXAMETHYLBICYCLO[2.2.0]HEXA-2,5-DIENE 2,3-DIMETHYL-2-BUTENE EPOXIDE,2,3-DIMETHYL-2-BUTENE OXIDE Tiglic aldehyde Bianthrone Popyrene glycol-diethylene glycol-dipropyrene glycol-maleic anhydride-phthalic anhydride copolymer 1,1-Diphenyl-3,3-dimethyl-1-butene (Z)-1-Cyclopropyl-3,3-dimethyl-1-butene (ALPHA,GAMMA-BISDIPHENYLENE-BETA-PHENYLALLYL), FREE RADICAL Dimethyl sebacate 1,2,3,4-TETRAPHENYL-1,3-CYCLOPENTADIENE

Email:[email protected] [email protected]
Copyright © 2024 Mywellwork.com All rights reserved.