Metolazone

Metolazone Basic information
Product Name:Metolazone
Synonyms:s720-22;Zaroxolyn;7-Chloro-1,2,3,4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo-6-quinazolinesulfonamide, SR-720-22, Diulo, Metenix, Mykrox, Oldren,;6-Quinazolinesulfonamide, 7-chloro-1,2,3,4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo- (9CI);6-Quinazolinesulfonamide, 7-chloro-1,2,3,4-tetrahydro-2-methyl-4-oxo-3-o-tolyl- (8CI);Normelan;Xuret;6-Quinazolinesulfonamide, 7-chloro-1,2,3,4-tetrahydro- 2-methyl-3-(2-methylphenyl)-4-oxo-
CAS:17560-51-9
MF:C16H16ClN3O3S
MW:365.83
EINECS:241-539-3
Product Categories:ZAROXOLYN;Other APIs;Organics;Amines;Aromatics;Heterocycles;Intermediates & Fine Chemicals;Pharmaceuticals;Sulfur & Selenium Compounds
Mol File:17560-51-9.mol
Metolazone Structure
Metolazone Chemical Properties
Melting point 252-254°C
Boiling point 613.6±65.0 °C(Predicted)
density 1.2895 (rough estimate)
refractive index 1.6100 (estimate)
storage temp. 2-8°C
solubility DMSO: >5mg/mL
form solid
pkapKa 9.7 (Uncertain)
color white
Water Solubility 60.3mg/L(25 ºC)
Stability:Stable for 2 years as supplied. Solutions in DMSO may be stored desiccated at -20°C for up to 2 months.
InChIKeyAQCHWTWZEMGIFD-UHFFFAOYSA-N
CAS DataBase Reference17560-51-9(CAS DataBase Reference)
NIST Chemistry ReferenceMetolazone(17560-51-9)
Safety Information
WGK Germany 2
RTECS VA1700000
HS Code 2935904000
Hazardous Substances Data17560-51-9(Hazardous Substances Data)
ToxicityLD50 in mice (mg/kg): >5000 orally; >1500 i.p. (Shetty, 1967)
MSDS Information
ProviderLanguage
Metolazone English
Metolazone Usage And Synthesis
DescriptionMetolazone (Item No. 26304) is an analytical reference standard categorized as a diuretic. It has been detected as an adverse analytical finding (AAF) during anti-doping testing. This product is intended for use in analytical forensic applications. This product is also available as a general research tool .
Chemical PropertiesCrystalline Solid
OriginatorZaroxolyn,Pennwalt,UK,1973
UsesMetolazone acts on the distal tubules, thus increasing excretion of water and sodium, potassium, and chloride ions. It is used for treating edema caused by cardiac insufficiency and adrenal irregularities, including nephrotic syndrome.
UsesA diruetic. An antihypertensive
Usesdiuretic, antihypertensive
DefinitionChEBI: A quinazoline that consists of 1,2,3,4-tetrahydroquinazolin-4-one bearing additional methyl, 2-tolyl, sulfamyl and chloro substituents at positions 2, 3, 6 and 7 respectively. A quinazoline diuretic, with properties similar to thiazide diuretics.
Manufacturing ProcessPreparation of Intermediate Compound N-Acetyl-5-Chloro-2-Methylaniline: To a well-stirred mixture of 1,270 g (9 mols) of 5-chloro-2-methylaniline in 7.5 liters of water at 34°C was added all at once 1,710 ml (18 mols) of acetic anhydride. A solution was obtained and then almost immediately the product started to crystallize. The temperature rose to 60°C. The mixture was stirred until the temperature dropped to 30°C. The product was filtered and washed well with water. Yield 97% (1,640 g), MP 134° to 138°C. Product was air dried and then in vacuum over P2O5.
Preparation of Intermediate Compound 5-Chloro-2-Methyl-4- Sulfamylacetanilide: Into a 3-necked 3-liter flask fitted with stirrer and thermometer 540 ml of chlorosulfonic acid were placed and cooled in an ice bath to 20°C. 300 g of the acetanilide were added portionwise while stirring and maintaining temperature at 20°C. This addition takes approximately 20 minutes. Remove the ice bath and add 88 g of sodium chloride portionwise (approximately 1 tsp every 10 minutes), This addition takes approximately 1 hour. Some foaming takes place. Using heating mantle bring temperature up slowly (approximately ? hour) to 75°C. Considerable foaming takes place and heating is continued another ? hour until 92°C is reached. Foaming can be controlled by shutting off heat and with good stirring. Once the temperature of 92°C has been reached and foaming has subsided reaction can be left unattended. Keep reaction at 92°C for a total of 2? hours.
Pour the hot reaction mixture onto 4 liters of crushed ice. Pour slowly and stir the ice mixture. What remains in the flask can be worked up by adding ice to it and swirling the contents. After approximately 3/4 of an hour, the solid is filtered and washed with approximately 600 ml water.
Break up cake into small pieces and add to 2.5 liters concentrated NH4OH in 4 liter beaker. Stir. Solid goes into solution and then the sulfonamide precipitates out. Heat to 50°C and then turn off heat. After ? hour cool in ice bath and filter. Wash cake with 600 ml water. Add cake to 2 liters 5% NaOH (130 ml 50% NaOH to 2 liters water). Filter and discard insolubles. While cooling filtrate add concentrated HCl until mixture is acid. Filter and wash cake until filtrate is neutral. Suck cake as dry as possible then air dry. Yield approximately 200 g (45%), MP 255° to 260°C.
Preparation of Intermediate Compound 4-Chloro-5-Sulfamyl-NAcetylanthranilic Acid: To a hot solution (80°C) of 366 g (1.482 mols) of magnesium sulfate (Epsom salts) in 2.8 liters of water was added 130 g (0.495 mol) of powdered 5-chloro-2-methyl-4-sulfamylacetanilide. With stirring and maintaining the temperature at 83°C, 234 g (1.482 mols) of potassium permanganate was added portionwise over a period of 2 hours. The mixture was then kept at 85°C with stirring for an additional 3 hours. By thistime the pink color of the permanganate had been discharged.
The mixture was cooled to 65°C and 250 g (2.0 mols) of sodium carbonate monohydrate was added. The warm reaction mixture was filtered and the cake washed with water. The filtrate was then slowly treated with concentrated hydrochloric acid until mixture tested acid. Product was then filtered, washed with water and dried. Yield 103 g (71.0%), MP 245° to 249°C (dec.).
Preparation of Intermediate Compound 2-Methyl-3-o-Tolyl-6-Sulfamyl-7- Chloro-4(3H)-Quinazolinone: Set up a 5-liter 3-necked flask fitted with a stirrer, condenser and a drying tube. To a stirred mixture of 100 g (0.342 mol) of powdered 4-chloro-5-sulfamyl-N-acetylanthranilic acid, 40.2 g (0.376 mol) of o-toluidine and 2.0 liters of dry toluene was added dropwise, over a period of 15 minutes, 21.7 ml (34.1 g) (0.248 mol) of phosphorus trichloride. The mixture was then refluxed for 10 hours. The solid turned somewhat gummy towards the latter part of the first hour. The mixture then became more free flowing as heating was continued. Let stand overnight. The yellow solid was filtered, washed with toluene and dried. The toluene filtrate was discarded. The dried solid was triturated with 1.5 liters of 10% sodium bicarbonate, filtered and the cake washed with water. The filtrate on acidification yielded 11.5 g of the starting acid. The damp product was dissolved in 4.5 liters of 95% ethanol and the solution treated with charcoal and filtered. On cooling filtrate yielded 69.5 g (55.5%) of the title compound, MP 271.5° to 274°C.
Preparation of the Final Compound 2-Methyl-3-o-Tolyl-6-Sulfamyl-7-Chloro- 1,2,3,4-Tetrahydro-4(3H)-Quinazolinone: To 4 liters of dry diglyme in a 12- liter 3-necked flask fitted with a stirrer, thermometer and drying tube was added 5.34 g (0.04 mol) of aluminum chloride, while stirring. To the resulting solution was added 43.6 g (0.12 mol) of 2-methyl-3-o-tolyl-6-sulfamyl-7- chloro-4(3H)-quinazoline. A solution of 4.56 g (0.12 mol) of sodium borohydride in 1 liter of dry diglyme was added portionwise over a period of 1 hour while stirring the mixture. The mixture was then heated at 85°C, with stirring, for 1 hour.
After cooling the reaction mixture to 25°C in an ice bath 600 ml of water was added and then enough dilute hydrochloric acid (approximately 100 ml) to make the solution acid. The solvent was then removed under reduced pressure at 60° to 70°C. The very viscid residue solidified when triturated with water. The solid was filtered and washed with water. The solid was dissolved in approximately 400 ml 95% ethanol and the solution filtered through Celite. On cooling the solution yielded 30 g of colorless solid, MP 253° to 259°C. The filtrate was concentrated to 200 ml to yield another 4.6 g, MP 253° to 259°C.
The above product was then recrystallized from 900 ml of 95% ethanol after filtering the hot solution through Celite. Crystallization was initiated and the mixture agitated occasionally while being cooled in the refrigerator. Yield of product 29 g, MP 253° to 259°C. Concentration of the filtrate to 125 ml yielded another 7.5 g of product, MP 253° to 259°C. The product was recrystallized another time in the manner described above. Total yield, first and second crops, 28.8 g (66%), MP 250° to 255°C. Product was dried at 80°C in a vacuum, according to US Patent 3,360,518.








Brand nameDiulo (Searle); Mykrox (UCB); Zaroxolyn(UCB).
Therapeutic FunctionDiuretic
Biochem/physiol ActionsInhibitor of thiazide-sensitive Na+-Cl- cotransporter; antihypertensive; moderate "loop" diuretic.
SynthesisMetolazone, 7-chloro-1,2,3,4-tetrahydro-2-methyl-4-oxo-3-o-tolyl-6-quinazolinsulfonamide (21.3.20), is synthesized from 5-chloro-2-methylaniline. The amino group is acylated by ethyl chloroformate, forming 5-chloro-N-ethoxycarbonyl-2-methylaniline (21.3.15). The product, upon subsequent reaction with chlorosulfonic acid and ammonia, is transformed in the usual manner into 4-sulfonamido-5-chloro-N-ethoxycarbonyl-2-methylaniline (21.3.16). The methyl group of this product is oxidized by potassium permanganate, giving 5-sulfonamido-4-chloro-N-ethoxycarbonyl anthranylic acid (21.3.17). Upon treating this with thionyl chloride it cycles into the corresponding anhydride (21.3.18). This reacts with o-toluidine, turning it into 2-amino-5-aminosulfonyl-4-chloro-o-toluolbenzamide (21.3.19). Finally, reacting this with dimethylacetal acetic acid gives metolazone (21.3.20).

Synthesis_17560-51-9

ReferencesIto et al. (2021), Metolazone upregulates mitochondrial chaperones and extends lifespan in Caenorhabditis elegans; Biogerontology, 22 119 Beaumont et al. (1988), Thiazide diuretic drug receptors in rat kidney: identification with [3H] metolazone; Proc. Natl. Acad. Sci. USA, 85 2311 Moreno et al. (2006), Affinity-defining domains in the Na-Cl cotransporter: a different location for Cl- and thiazide binding; J. Biol. Chem., 281 17266 Temperini et al. (2008), Carbonic anhydrase inhibitors. Interaction of indapamide and related diuretics with 12 mammalian isozymes and X-ray crystallographic studies for the indapamide-isozyme II adduct; Bioorg. Med. Chem. Lett., 18 2567
Metolazone Preparation Products And Raw materials
Raw materialsPhosphorus trichloride
5-Methyl-1H-benzotriazole 2-AMINO-N,N-DIMETHYL-BENZAMIDE Sulclamide 4-Amino-3-methyl-benzenesulfonamide 4-CHLOROBENZANILIDE 2'-AMINOBENZANILIDE m-Toluenesulfonamide, alpha-amino- (5CI) o-Chlorobenzenesulfonamide Metolazone 2-AMINO-N-(2-METHYLPHENYL)BENZAMIDE METHAQUALONE Thiophanate-methyl p-Toluenesulfonamide BENZAMIDE, 4-CHLORO-N-(2-METHYLPHENYL)- NSC57663 METSULFURON METHYL 2-METHYLAMINOBENZAMIDE 2-DIMETHYLAMINOMETHYL-ANILINE

Email:[email protected] [email protected]
Copyright © 2024 Mywellwork.com All rights reserved.